|
|
楼主 |
发表于 2012-8-1 21:38
|
显示全部楼层
arion 发表于 2012-8-1 21:34
4AGE，81*77.4，5气门；VAG的1.6，81*77.4，5气门；
YY也要有个限度
嗯~~我会转告老外的~~我自己倒是没实物
但我觉得老外这个视角是成立的·如此而已·
All 1.6 THP engines have the same connecting rods: 150,156, 175 and 200hp versions.
The stock connecting rods have a piston pin diameter 20 mm, bottom end diameter 48mm and center-center distance of 138,5 mm.
Following a rumour, according to which THP engines had very similar connecting rods to some Honda engine, we
looked into the many different types available.
As a result, we found that the Honda B18C engine, found on the Acura Integra, has extremely similar dimensions
to the THP connecting rod.
B18C connecting rods have a piston pin diameter of 21mm, bottom end diameter 48mm and center-center distance of 138mm.
The fact that B18C rods are shorter by 0.5mm means that the compression ratio is reduced compared to the stock connecting rod.
And because the piston pin is 21mm instead of 20mm, aftermarket pistons have to be used with them instead of the stock THP pistons.
The connecting rods shown below were made by Eagle and their code is CRS5430A3D . |
|
发表于 2012-8-1 20:36
别急~~别人过来一趟不容易~~耐心，我自己的车也等着呢~~