速道性能车改装车网

 找回密码
 注册为道友

手机短信,快捷登录

QQ登录

只需一步,快速开始

查看: 3916|回复: 13

萨博SAAB燃烧控制系统

[复制链接]
发表于 2008-9-26 13:29 | 显示全部楼层 |阅读模式

马上注册,解锁更多精彩内容!

您需要 登录 才可以下载或查看,没有帐号?注册为道友

x
01.jpg
 楼主| 发表于 2008-9-26 13:29 | 显示全部楼层
萨博SAAB

04.jpg 05.jpg
 楼主| 发表于 2008-9-26 13:30 | 显示全部楼层
燃烧控制系统

02.jpg 03.jpg
 楼主| 发表于 2008-9-26 13:32 | 显示全部楼层
1. The air/fuel mixture burns. The combustion heat causes the pressure of the gas mixture to rise, which presses the piston downwards.

06.jpg
 楼主| 发表于 2008-9-26 13:33 | 显示全部楼层
2. The exhaust valves open when the piston has reached the bottom of its stroke. Most of the exhaust gases are discharged through the exhaust ports due to the pressure difference between the interior of the cylinder and the outside of the gas ports. This takes place during a short period when the piston is at the Bottom Dead Centre. The remainder of the exhaust gases is discharged through the exhaust ports as the piston moves up.

07.jpg
 楼主| 发表于 2008-9-26 13:34 | 显示全部楼层
3. Just before the piston reaches Top Dead Centre, petrol is injected into the cylinder through the spark plug injector. The inlet valves open at the same time. Exhaust gases mixed with petrol are discharged through both the exhaust and the inlet ports. The prevailing operating conditions determine the exact length of time during which the opening of the exhaust and inlet valves overlaps (and thus the proportion of exhaust gases that will remain in the combustion chamber during combustion).

08.jpg
 楼主| 发表于 2008-9-26 13:35 | 显示全部楼层
4. The piston moves downwards. The exhaust and inlet valves are open. The mixture of exhaust gases and petrol is drawn back from the exhaust ports into the cylinder. A large proportion of the exhaust gas/petrol mixture flows up into the inlet ports.

09.jpg
 楼主| 发表于 2008-9-26 13:35 | 显示全部楼层
5. The piston continues on its downward travel. The exhaust valves close but the inlet valves remain open, and part of the exhaust gas/petrol mixture that flowed up into the inlet manifold is drawn back into the cylinder.

10.jpg
 楼主| 发表于 2008-9-26 13:36 | 显示全部楼层
6. The piston approaches Bottom Dead Centre. All of the exhaust gas/petrol mixture has now been drawn back into the cylinder, and during the final phase of the inlet stroke, the air needed for combustion is drawn in (14.6 parts of air for every part of fuel).

11.jpg
 楼主| 发表于 2008-9-26 13:36 | 显示全部楼层
7. The inlet valves close. The piston moves upward, and the mixture of exhaust gases, air and petrol is compressed. About half-way up the compression stroke (about 45 degrees of crankshaft rotation), and before the spark has ignited the air/petrol mixture, the spark plug injector delivers a blast of air into the cylinder. The air blast creates the turbulence needed to facilitate combustion and shorten the combustion time.

12.jpg
您需要登录后才可以回帖 登录 | 注册为道友

本版积分规则


速道改装车社区论坛所有帖子仅代表作者本人意见,不代表本网站立场。
转载文章请注明作者及出自"速道性能车改装车网(http://www.chinway.com.cn)",如用于商业用途请联系原作者

拒绝任何人以任何形式在本论坛发表与中华人民共和国法律相抵触的言论!

©2007-2020 速道性能改装车网

手机版|小黑屋|Archiver|速道性能车改装车网 ( 鄂ICP备12008421号-2 )

GMT+8, 2024-11-22 02:12 , Processed in 0.069312 second(s), 21 queries .

Powered by Discuz! X3.4 Licensed

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表