This is a camshaft that would be used for road use and will normally run with standard carb or injection system and can be fitted without additional tuning equipment. It is meant for town use and will have a smooth tick-over and will give it's increase in power in the low mid-range. Other modifications to the engine will increase the performance of this cam.
This is a camshaft for increasing mid-range of the engines and is meant for mild competition use and where the driver requires an increase of power in the mid-range without suffering too much loss of power in the low-range. The tick-over will be heavier than a stan­dard engine. The fuel system may have to be modified and the cam will work to its optimum with modifications to the cylinder head, inlet/exhaust system and possibly the management system.
发表于 2009-7-29 22:04
楼主
发表于 2009-7-29 22:20
