昆山206 发表于 2009-2-27 08:21

发几张图 关于后悬高度

上图!!!!

GY@206 发表于 2009-2-27 08:50

你还真早啊!!!

wx-dq 发表于 2009-2-27 09:00

是啊,每次我上班第一件事就是打开速道,不过还是有朋友更早,呵呵~

昆山206 发表于 2009-2-27 09:14

哈哈 都差不多

昆山206 发表于 2009-2-27 09:20

Document created: 08.02.2003

Last modified: 16.08.2006

Models concerned: 206 GTi and 206 CC 2 litre

Symptoms:
Knocking noise from the front of the vehicle when turning corners under light acceleration. The noise usually stops as soon as the brake is slightly applied. In all the cases known to us the knock could not be heard when driving straight and over bumps.

Cause:
Play in the front inner joint of the suspension control arm.

Checking:
It may not be possible to detect the play with the car on a hoist with the suspension fully extended.
It is therefore best to detach the balljoint from the hub; the smallest amount of play will then become easily noticeable.

Note:
Several of t***e joints had to be replaced to date. It appears there is a general weakness in that area, as in all cases known to us, the bearing failure occurred at very low mileage.
Worth keeping an eye on!

New Note:
Since the creation of t*** document many more joint failures have occurred. One vehicle had to have 2 joints replaced with 12 000km on the clock. Without any doubt, there is a problem with t***e parts. Peugeot owners with noise in the front suspension should have the control

nuanhu 发表于 2009-2-27 09:36

感觉很专业,没看懂gochinway43;)
最后一张三角臂是什么意思?

neogaia 发表于 2009-2-27 09:42

谁翻译下。。。。看8懂洋文。。

昆山206 发表于 2009-2-27 10:10

大致意思是转弯轻加速有异响

larryzhou 发表于 2009-2-27 10:30

能pm下出处吗?正好在研究这个问题,,

昆山206 发表于 2009-2-27 10:35

能pm下出处吗?正好在研究这个问题,,
larryzhou 发表于 2009-2-27 10:30 http://www.chinway.com.cn/bbs/images/common/back.gif
现在不在家里 晚上PM你连接
页: [1] 2
查看完整版本: 发几张图 关于后悬高度


速道改装车社区论坛所有帖子仅代表作者本人意见,不代表本网站立场。
转载文章请注明作者及出自"速道性能车改装车网(http://www.chinway.com.cn)",如用于商业用途请联系原作者

拒绝任何人以任何形式在本论坛发表与中华人民共和国法律相抵触的言论!

©2007-2020 速道性能改装车网