fissa 发表于 2012-6-8 01:42

专利申请显示了宝马7速手动波箱的工作原理

英文,自己翻~看gochinway12;) 我翻译也未必准~~免得误人子弟

fissa 发表于 2012-6-8 01:43

BMW has invited itself to a party that Porsche started. Someone trolling through patent filings found drawings submitted by BMW for two slightly different takes on a seven-speed manual transmission. The first take is a more conventional setup that provides an honest clutch pedal. The second variant uses a shift-by-wire system to swap gears through an electromechanical actuator. To prevent drivers from accidentally engaging an engine-damaging gear in such a closely spaced pattern, both rely on an electromagnetic fluid inside a shifting module that can change viscosity to prevent the 'lever' from making a shift.

According to the filing, the system can work with up to eight(!) gears. It isn't clear if, even in the system with the clutch, the gear lever is actually attached to any of those gears.

What's also notable about the drawings is the shift pattern. Porsche's seven-speed shift pattern in the 991-series 911 places reverse and the odd gears above, the even gears below. But the BMW pattern in the drawing places reverse and seventh gear in opposing positions at the ends of the axis that is normally, entirely, neutral. Also, the shift pattern is drawn on what looks more like an iDrive-shaped stick, not the usual BMW manual transmission knob, nor the stubby dual-clutch stick as found in the BMW M6 whose reverse gear is still located above neutral.

Who knows if or when we'll ever see it, but it's encouraging just to know that advanced, row-your-own transmissions are still on drawing boards somewhere.

wuyakuku 发表于 2012-6-8 07:25

更省油???

hulidaner 发表于 2012-6-8 09:41

200以下的时速6速就够啦?

fissa 发表于 2012-6-8 13:05

wuyakuku 发表于 2012-6-8 07:25 static/image/common/back.gif
更省油???

齿比更绵密~~对应对应的速差更广啊~
页: [1]
查看完整版本: 专利申请显示了宝马7速手动波箱的工作原理


速道改装车社区论坛所有帖子仅代表作者本人意见,不代表本网站立场。
转载文章请注明作者及出自"速道性能车改装车网(http://www.chinway.com.cn)",如用于商业用途请联系原作者

拒绝任何人以任何形式在本论坛发表与中华人民共和国法律相抵触的言论!

©2007-2020 速道性能改装车网