改装论坛 › 其他车品牌改装综研区 › KW搅牙避震结构透视

fissa 发表于 2011-7-25 05:19

KW搅牙避震结构透视

有几张图，可以看看，，

fissa 发表于 2011-7-25 05:22

The shock has an inner and an outer tube.The rod and piston are in the inner tube with a foot valve controlling fluid flow between the inner and outer tubes.There must be a space between the tubes filled with pressurized nitrogen gas to allow room for fluid displaced by the volume of the piston rod.

fissa 发表于 2011-7-25 05:23

When the shock is fully compressed, you can see the large amount of fluid that has flowed between the inner and outer tubes though the foot valve.This is the fluid that allows for adjustment to the compression damping.

fissa 发表于 2011-7-25 05:24

The rebound adjuster is found at the top of the shock and it turns a rod that adjusts preload on a spring loaded needle valve that controls fluid flow past the piston as the shock is extending.

fissa 发表于 2011-7-25 05:25

The compression adjuster is found on the bottom of the shock and it also controls preload on a spring that puts pressure on a needle valve that controls fluid flow between the inner and outer tubes as the shock is being compressed.

fissa 发表于 2011-7-25 05:25

You can see the foot valve assembly here.It generates most of the compression control.

fissa 发表于 2011-7-25 05:26

You can see the piston here.Most ofthe rebound control is generated here.

又忘了以前的ID 发表于 2011-7-25 10:11

这是运动功能饮料哈~~~

小塘神马 发表于 2011-7-25 10:50

gochinway34；）

死胖子 发表于 2011-7-25 10:50

牛逼~！

查看完整版本: KW搅牙避震结构透视