改装论坛 › 其他车品牌改装综研区 › 国内还有谁做这样精确地调教？

fissa 发表于 2009-10-8 18:49

国内还有谁做这样精确地调教？

gochinway15；）

fissa 发表于 2009-10-8 18:57

If money allows, have the machine shop align-bore the cylinder-block main caps. The align-bore process delivers a perfectly straight crankshaft centerline within the block. Oftentimes, if the block is not line-bored, uneven clamping pressure will be distributed to the crankshaft--causing it to bind-up slightly as it rotates, which can rob horsepower, cause premature wear or lead to bearing failure.

A simple at-home machining process involves tapping all of the bolt holes on the cylinder block. The tap straightens the bolt hole threads and removes debris from the hole.

Before assembling the engine, always wash the cylinder block, crankshaft and rods with soapy water. Use a bottle brush to clean all of the small holes and galleries in the block.

都市靓车 发表于 2009-10-8 19:13

gochinway35；）

极度飘逸 发表于 2009-10-8 20:02

gochinway07；）

煽风点火 发表于 2009-10-8 20:52

就=大洼你了 gochinway05；）

fissa 发表于 2009-10-8 21:08

刘勇、老丁那儿就缺这样做精品的精神。。。哎！就=大洼你了 gochinway05；）
煽风点火 发表于 2009-10-8 20:52 http://chinway.com.cn/bbs/images/common/back.gif

小车明 发表于 2009-10-10 22:13

都忘记怎么量了．．．．gochinway06；）

枪手与国王 发表于 2009-10-19 21:15

调效才是硬道理gochinway72；）

小林 发表于 2009-10-25 18:44

技术活！！！

查看完整版本: 国内还有谁做这样精确地调教？